KO-KR▼
본 제품은 아래 브랜드의 장비 및 응용 분야와 호환되거나 이에 적합하며, 선정 시 참고용으로만 제공됩니다. 상표는 각 소유자에게 귀속되며 파트너십이나 보증을 의미하지 않습니다.
Ranveth supplies sintered activated carbon block filters that pair a high-efficiency dust-blocking microfiber layer with a high-iodine coconut-shell carbon core, removing dust, PM2.5, formaldehyde, VOCs and odour molecules in one bonded structure. The filter is built for equipment where both particle and gas removal matter — fresh-air systems, vehicle cabin air filters, premium odour-removal vacuum cleaners, and household or commercial air purifiers. Ranveth manufactures these blocks through a one-piece high-temperature sintering process that resists carbon dust release and keeps airflow resistance low, so buyers get stable efficiency without sacrificing energy use.
The performance of a sintered carbon block starts with how the two media are matched. Ranveth pairs a high-efficiency microfiber dust layer at the upstream face with a high-iodine coconut-shell activated carbon core. The microfiber layer captures coarse dust and fine particles before they reach the carbon, protecting the adsorption surface and extending usable life. The carbon core, formed by high-temperature sintering, delivers a uniform pore structure for formaldehyde, VOCs and odour molecules. Because the carbon is bonded rather than loose-filled, the block resists carbon fines release — a key point for printers, copiers and other equipment with precision components nearby.
This pairing also controls airflow resistance. The microfiber layer is selected for low pressure drop, and the sintered carbon body is formed with open, evenly distributed channels so air passes through without channelling or bypass. The result is a filter that removes both particles and gases in a single stage, saving space compared with separate dust and carbon stages. For buyers, that means simpler equipment design, fewer part numbers, and predictable pressure drop across the life of the filter.
| Item | Detail |
|---|---|
| Core product name | Sintered carbon block / activated carbon HEPA composite filter |
| Media composition | High-efficiency dust-blocking microfiber layer + high-iodine coconut-shell activated carbon core |
| Process and structure | One-piece high-temperature sintering, anti-dust-release technology, ultra-low air resistance |
| Core application areas | Fresh-air system pre-filtration and fine filtration, vehicle cabin air filters, premium odour-removal vacuum cleaners, household and commercial air purifiers |
| Target contaminants | Dust, particulate matter, PM2.5, formaldehyde, VOCs, odour molecules |
| Factory certifications | ISO 9001 / ISO 14001 / ISO 45001 / IATF 16949 / CNAS-accredited laboratory |
| Procurement and customisation | Filter structure development, specification customisation, processing from drawings or samples (OEM / ODM) |
The filter is typically specified where a compact footprint and combined gas and particle removal are required. In fresh-air systems, it can serve as a pre-filter or fine filter stage, depending on the target efficiency and available pressure budget. In vehicle cabin air filters, the sintered block helps manage VOCs and odours while the microfiber layer handles particles. Premium odour-removal vacuum cleaners use the block to control exhaust odours without adding a bulky loose-carbon stage. Household and commercial air purifiers use it to combine PM2.5 reduction with formaldehyde and VOC adsorption in one cartridge.
Because the block is rigid and self-supporting, it can be designed into rectangular, cylindrical or custom-shaped housings. Ranveth supports structure development and specification customisation, so the same media pairing can be tuned for different airflow rates and contaminant loads. The goal is to match the media and layer build to the device, not to force a standard cartridge into every application.
To quote a custom sintered carbon block, we need the following inputs. Clear inputs shorten sample lead time and reduce back-and-forth.
With these details, Ranveth can propose a media pairing, layer build and block geometry, then confirm performance with testing in our CNAS-accredited laboratory.
Ranveth's media choices are test-backed. Our in-house laboratory is CNAS-accredited and can issue reports on filtration efficiency, dust holding capacity and resistance, so the layer build we recommend is supported by measured data rather than assumption.
Production runs in a 50,000 m² plant that includes six cleanrooms totalling 20,000 m². This environment supports consistent sintering and assembly, and our quality system covers IQC, IPQC and OQC from incoming carbon to finished block.
We hold IATF 16949 certification (obtained in 2024) and ISO 9001, ISO 14001 and ISO 45001 systems. Products meet REACH and RoHS requirements, and we can supply compliance documents for export markets. With more than 20 years of filtration development and manufacturing, Ranveth has built over 1,000 filtration solutions and exports to Europe, the United States, Japan and South Korea. OEM and ODM services cover size, structure, media grade, frame material, logo and packaging, and multiple automated lines support monthly output in the millions of pieces. Our address is Zhongshan, Guangdong, China.
If you are evaluating a sintered carbon block for a new device or replacing an existing filter, send us the device or vehicle model, size or drawing, airflow or water flow, operating conditions and quantity. We will review the media pairing and layer build and come back with a sample proposal and quotation. You can reach our team through the contact page.
It combines a high-efficiency dust-blocking microfiber layer with a high-iodine coconut-shell activated carbon core. The microfiber layer captures particles first, while the sintered carbon core adsorbs formaldehyde, VOCs and odour molecules. The two media are bonded in a one-piece high-temperature sintering process.
For ozone generated by printers and copiers, the filter achieves a single-pass removal efficiency of 95% or higher. The high-iodine coconut-shell carbon, with an iodine value above 1000 mg/g, also adsorbs VOCs and odours. Performance can be tuned to your specific airflow and operating conditions, and test reports are available from our CNAS-accredited laboratory.
The sintered block is formed in one piece, so it resists carbon dust release and avoids contaminating nearby precision components. Its carbon layer has uniform density, which prevents air channelling and bypass, giving more stable efficiency. Service life is typically 6–12 months depending on the environment.
Yes. We support OEM and ODM projects and can customise dimensions, shape (rectangular, round or irregular), thickness and frame material based on your drawings, samples or device model. Packaging can also be customised, including neutral, branded or colour-box options. Send your requirements and we will propose a build.
The factory holds ISO 9001, ISO 14001, ISO 45001 and IATF 16949 certifications, and our laboratory is CNAS-accredited. Products meet REACH and RoHS requirements, and we can provide compliance documents. We have exported to Europe, the United States, Japan and South Korea for over 20 years.
Standard models typically have an MOQ of 500–1,000 pieces, while custom models are negotiated based on specification. Sample lead time is generally 7–15 working days depending on complexity; standard samples can be provided free for evaluation, and custom samples may incur a development fee. Bulk orders usually ship in 25–35 days, with expedited options available.
Service life depends on ozone concentration, airflow and temperature in the application. We typically recommend replacement every 6–12 months or based on accumulated operating hours. We can provide life-test data and replacement guidance for your specific conditions.
Send us the device or vehicle model, size or drawing, airflow or water flow, operating conditions and required quantity. Our team will review the media pairing and layer build and respond with a sample proposal and quotation. You can reach us through the contact page.