RU-RU▼
Ranveth coffee machine filter cartridges are compatible with KitchenAid KCM22WF and are designed to reduce scale and chlorine in the water used by automatic and semi-automatic espresso machines. The cartridge pairs a coconut-shell activated carbon block with food-grade ion-exchange resin, a combination that targets both organic taste and odour compounds and the minerals that form limescale. It is intended for coffee equipment serving homes, offices and light commercial settings where water quality directly affects taste and machine life.
Inside the cartridge, water first meets a coconut-shell activated carbon layer selected for its balance of adsorption capacity and low resistance. This layer reduces residual chlorine, off-flavours and organic compounds that can flatten coffee aroma. Downstream, a bed of food-grade ion-exchange resin exchanges hardness minerals for softer ions, which lowers the scaling potential of the water before it reaches the boiler or thermoblock.
The order matters. By placing carbon ahead of the resin, the resin is protected from chlorine and organic fouling that would otherwise consume its exchange capacity prematurely. The carbon layer also acts as a depth filter: fine microporous interception captures sediment, rust and other large particles that could block the resin bed or pass into the brew path. This two-stage pairing is what allows the cartridge to maintain a useful flow rate while still delivering chemical reduction and scale control over its service interval.
The rated service life of approximately 250 litres, or 2–3 months, reflects this balance between media mass and pressure drop. Increase the carbon mass and you gain taste improvement but lose flow; increase the resin and you gain hardness reduction but shorten the carbon's protective role. Ranveth sizes the media volumes so that both functions reach end of life at roughly the same point, avoiding the common problem of a cartridge that still flows freely but has already stopped softening.
Operating limits are set to protect the media. The cartridge is rated for 20–120 psi (approximately 1.4–8.3 bar) and 2°C–38°C, cold water only. Higher temperatures or pressures can channel the media bed and shorten effective life, so system designers should confirm these conditions before specifying the cartridge.
| Item | Detail |
|---|---|
| Filtration media | Coconut-shell activated carbon combined with food-grade ion-exchange resin |
| Micron rating | Fine microporous interception; captures sediment, rust and other large particles |
| Service life | Approximately 250 litres or 2–3 months, depending on local water quality and usage frequency |
| Operating pressure | 20–120 psi (approximately 1.4–8.3 bar) |
| Operating temperature | 2°C–38°C, cold water filtration only |
| Applications | Automatic coffee machines, semi-automatic espresso machines, commercial coffee machine water softening, OEM water filter cartridge manufacturing |
| Quality systems | Production follows ISO 9001/14001, IATF 16949, medical supplies GMP standard, CNAS national testing certification |
The primary use is coffee brewing, where water is both an ingredient and a wear factor. In automatic bean-to-cup machines, the cartridge protects boilers and flow meters from scale while reducing chlorine notes that compete with roast character. In semi-automatic espresso machines, consistent water chemistry helps stabilize extraction from shot to shot, which matters in cafés and training environments.
Commercial coffee service often uses the cartridge as a point-of-use softener ahead of steam wands and brewing boilers, extending descaler intervals and reducing downtime. The same media pairing is also available for OEM programmes: coffee machine brands and distributors can specify the cartridge under their own label, with adjustments to dimensions, connector geometry and media grade to suit different machine families.
Because the cartridge is compatible with KitchenAid KCM22WF, it serves as a direct replacement in that model. Ranveth manufactures to the original interface and flow requirements so that the fit is consistent; each production batch is assembly-tested and flow-tested before shipment. For other coffee machine models, the same media system can be rehoused in a different shell or connector.
Custom builds start from the machine, not the cartridge. To quote accurately we need the device or vehicle model, or a dimensional drawing showing the cartridge envelope, inlet and outlet, and any keying features. Please also state the required flow rate or water flow at the operating pressure, and the water conditions: hardness, chlorine level, sediment load and temperature. Quantity expectations and target packaging format help us choose between standard tooling and a dedicated mould.
With those inputs, our engineering team can propose a media pairing — carbon grade, resin type and layer thickness — that meets the flow and life targets. We can adjust external colour, logo laser marking or silk printing, media formulation for local water, dimensions and connector structure, and packaging including colour boxes, manuals and multilingual labels. Sample turnaround is typically 2–3 weeks for custom builds.
Media choices are only as good as the evidence behind them. Ranveth operates a self-built laboratory accredited by CNAS (China National Accreditation Service for Conformity Assessment), which issues test reports for filtration efficiency, dust holding capacity and resistance. For a coffee cartridge, that means the pairing of carbon and resin can be validated on measurable criteria rather than assumption.
Production takes place in a 50,000 m² plant in Zhongshan, Guangdong, China, including six cleanrooms totalling 20,000 m². The quality system holds ISO 9001, ISO 14001 and ISO 45001, and in 2024 the company obtained IATF 16949 automotive quality management certification. These systems support batch consistency from incoming material inspection through in-process checks to outgoing inspection.
Ranveth has more than 20 years of filtration product development and manufacturing experience and has been exporting to Europe, the United States, Japan and South Korea for over 20 years. The company supports OEM/ODM across dimensions, structure, media grade, frame material, logo and packaging, and has developed more than 1,000 filtration solutions. Multiple automated production lines support monthly output in the millions of pieces.
To move forward, tell us the coffee machine model, the required size or a drawing, the flow rate or water flow, the operating conditions (pressure, temperature, hardness, chlorine), and the quantity you expect per order and per year. We will respond with a media recommendation, sample plan and quotation. Contact our team to start the conversation.
The cartridge uses coconut-shell activated carbon followed by food-grade ion-exchange resin. The carbon reduces chlorine, taste and odour compounds and intercepts sediment, while the resin lowers hardness minerals that cause scale. This two-stage pairing is rated for approximately 250 litres or 2–3 months.
Placing carbon ahead of the resin protects the resin from chlorine and organic fouling and captures particles that could block the bed. Ranveth sizes the media volumes so that chemical reduction, scale control and pressure drop stay balanced across the service interval. The result is a useful flow rate without sacrificing taste or softening performance.
Yes, it is designed to the KitchenAid KCM22WF interface, and each batch is assembly-tested and flow-tested before shipment. For other coffee machine models, the same media system can be rehoused with different dimensions or connectors. Customisation covers colour, logo, media formulation, dimensions, connector structure and packaging.
Rated life is approximately 250 litres or 2–3 months, whichever comes first. Actual life depends on local water hardness, chlorine level and usage frequency. In hard-water areas, replacing closer to the 2-month mark helps protect the boiler and maintain taste.
Standard samples can be provided free of charge, with the customer covering freight; custom samples carry a small development fee that is refundable on order confirmation. Samples usually ship within 3–7 working days. Our CNAS-accredited laboratory can also provide test reports to support your evaluation.
The standard compatible model has an MOQ of 5,000 pieces, with stock or small-batch orders typically delivered in 15–20 days. OEM customised versions are recommended from 10,000 pieces, with a production cycle of about 25–30 days including mould and packaging development. Monthly capacity is in the millions of pieces.
It is rated for 20–120 psi (approximately 1.4–8.3 bar) and 2°C–38°C, cold water only. Operating outside these limits can channel the media bed and shorten effective life. Confirm your system pressure and temperature before specifying the cartridge.
Send us the device or vehicle model, size or drawing, required flow rate or water flow, operating conditions, and expected quantity. We will respond with a media recommendation, sample plan and quotation. You can reach our team through the contact page.